Hella Marine

Warm White / Red EuroLED 150 Touch Lamp

Series: EuroLED 150
View My Favourites

New generation EuroLED 150 Touch.
Efficient, state-of-the art LED lamps offering advanced technology for durable and power saving interior and exterior installations. The durability and single LED efficiency of Hella marine EuroLED technology continues in a new generation of completely sealed LED lamps.

Dual colour EuroLED 150 Touch lamps with dimming and remote momentary switch control. Touch the colour pad for ON/OFF, hold finger on the pad to cycle through dimming levels.

Proven Hella marine touch switching technology makes lighting control beautifully simple. Touch the red pad for red light, the white pad for white light. Hold your finger on the pad for more than two seconds and the lamp will cycle through increasing / decreasing intensity levels until the maximum / minimum intensity is achieved. Release your finger on the light level required. Power consumption is a low 4W on neutral white or warm white (0.33A @12V) and less than 1.5W on red (less than 0.125A@12V). This provides significant energy savings on board, yet each device offers an effective intensity and wide spread of effective illumination and comfortable colour temperatures.

The durability of EuroLED 150 Touch lamps is outstanding. Each device is a sealed unit, highly impact and shock resistant for an ultra long service life. Integrated MultivoltTM electronics provide consistent illumination and protection across a range of input voltages from 9-33 DC, even under severe voltage fluctuations, low battery voltages and long cable runs. EuroLED 150 Touch technology provides ultra reliable, power saving illumination for a wide range of commercial and recreational applications. EuroLED 150 Lamps can be recess or surface mounted and come supplied with a surface mount spacer.

CE

CE

Electromagnetic Compatibility (EMC) All Hella marine LED products are electronic devices. Their electrical circuits contain components that suppress possible interference, both emission as well as susceptibility to emmissions, to the limits prescribed in international standards.

Made in New Zealand

Made in New Zealand

Made and manufactured in New Zealand

LED

LED

LED - Light Emitting Diode

12 & 24V DC Multivolt

12 & 24V DC Multivolt

12 & 24V DC Multivolt. This product is designed for operation on 12V and 24V systems.

IP 67

IP 67

IP 67- Completely Sealed. Each Hella marine LED lamp is a completely sealed opto-electronic device. Proven design, precision engineering, and the use of high impact acrylic and polymer materials ensures superior resistance to water, impact and UV damage.

UV Resistant

UV Resistant

UV Resistant. Proven design, precision engineering, and the use of high quality materials ensures superior resistance to water, impact, UV and general wear and tear.

5 Year Warranty

5 Year Warranty

All LED based lighting products manufactured by Hella marine carry a 5 Year Warranty covering faults in material, components or workmanship.

Option Part Number
9-33V DC White Plastic Rim 9-33V DC White Plastic Rim 2JA 980 630-101
9-33V DC Polished Stainless Steel Rim 9-33V DC Polished Stainless Steel Rim 2JA 980 630-111
Lens Material UV resistant enhanced impact acrylic
Rim Material UV resistant plastic. 316 stainless steel
Colour Temperature 3000K (Warm White)
Cable Pre-wired with 500mm of triple core marine cable
Operating Voltage Multivolt 9-33V DC
Power Consumption 4.0W ( 0.33A@12V / 0.16A@24V )
Degree of Protection Completely Sealed
Weight 245g (including cable)
Installation Recessed mount
Approvals CE
Document File Name File Size
Product BrochureHella marine product news Euroled 150 Lamps.pdf 1.16 MB
Instruction SheetInstruction Sheet - 2JA 980 630-xxx Recessed EuroLED Touch White-Red & White-Blue.pdf 635.37 KB
Top of Page