Hella Marine

LED Surface Strip Lamps with Switch

Series: Surface Strip Lamps
View My Favourites

The new Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile, these lamps are easy to install and ideal for interior or exterior applications.

Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.

The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.

Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.

Available in white or warm white, and also in white and warm white with dual colour options, these lamps are excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.

Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.

CE

CE

Electromagnetic Compatibility (EMC) All Hella marine LED products are electronic devices. Their electrical circuits contain components that suppress possible interference, both emission as well as susceptibility to emmissions, to the limits prescribed in international standards.

LED

LED

LED - Light Emitting Diode. Combining efficient LED sources with advanced optic technology, Hella marine LED products deliver more light output per watt than incandescent based lamps with significant energy savings. Ultra low heat signatures reduce heat on board and prevent damage to surrounding materials.

12V DC

12V DC

12V DC Dimmable via Hella marine Dimmer 5XA 998 572-001

24V DC

24V DC

24V DC Dimmable via Hella marine dimmer 5XA 998 572-001

IP 67

IP 67

IP 67- Completely Sealed. Each Hella marine LED lamp is a completely sealed opto-electronic device. Proven design, precision engineering, and the use of high impact acrylic and polymer materials ensures superior resistance to water, impact and UV damage.

UV Resistant

UV Resistant

UV Resistant. Proven design, precision engineering, and the use of high quality materials ensures superior resistance to water, impact, UV and general wear and tear.

5 Year Warranty

5 Year Warranty

All LED based lighting products manufactured by Hella marine carry a 5 Year Warranty covering faults in material, components or workmanship.

Option Part Number
12V DC, White LEDs with Sealed Switch 12V DC, White LEDs with Sealed Switch 2JA 958 123-001
12V DC, Warm White LEDs with Sealed Switch 12V DC, Warm White LEDs with Sealed Switch 2JA 958 123-101
24V DC, White LEDs with Sealed Switch 24V DC, White LEDs with Sealed Switch 2JA 958 123-401
24V DC, Warm White LEDs with Sealed Switch 24V DC, Warm White LEDs with Sealed Switch 2JA 958 123-501
45° Mounting Bracket - white 45° Mounting Bracket - white 8HG 958 000-011
Lens Material UV resistant enhanced impact acrylic
Colour Temperature 5000K (White) 2700K (Warm White)
Power Consumption <3.0W (<0.25A @ 12V / <0.16A @ 24V )
Operating Voltage 12V DC or 24V DC
Dimming Hella marine Dimmer 5XA 998 572-001 (Not recommended for 2JA 958 121-xxx – dual color lamp series)
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
Surface Strip Lamp with Switch Line Drawing
Document File Name File Size
New Product ReleaseSurface Strip LED Lamps with Switch Product Release - Int English.pdf 1.70 MB
Instruction SheetLED Surface Mount Strip Lamp Switched and Non Switched for 2JA 958 121-xxx 2JA 958 123-xxx 2JA 958 124-xxx.pdf 620.14 KB
Top of Page