Advanced Hella marine LED trailer lamps are the highly visible, maintenance free solution for reliable and safe boat trailer lighting.
Designed and manufactured in New Zealand, each is a completely sealed, maintenance free unit. They are also shock, vibration, UV and corrosion resistant and represent true ‘fit and forget’ technology.
MultivoltTM electronics reduce the effect of voltage drop, ensuring ongoing safety. This means Hella LED lamps perform at full brightness across a range of voltages unaffected by voltage drop that can dull bulb lamps due to long able runs, joins, terminals and plugs in a boat trailer’s wiring.
Kit Contains:
2 x 2SD 959 010-203 (Legacy P/N: 2399) Combination Lamps
2 x 8RA 980 565-102 (Legacy P/N: 2934H) Horizontal Base with Reflectors
1 x 2KA 959 640-341 (Legacy P/N: 2559) Number Plate Lamp
1 x 8JA 910 032-001 (Legacy P/N: 4921) 7 Pole Flat Trailer Plug
83mm diameter LED Stop / Rear Position / Rear Direction Indicator Lamp.
Installation with single bolt mount.
ADR approved.
ADR Compliant
When a vehicle has been certified as meeting the ADRs it can be fitted with a compliance plate. The fitment of a compliance plate is mandatory under the Motor Vehicles Standards Act, and it indicates to the registering authority that the vehicle is eligible for registration.
Made in New Zealand
Made and manufactured in New Zealand
LED
LED - Light Emitting Diode. Combining efficient LED sources with advanced optic technology, Hella marine LED products deliver more light output per watt than incandescent based lamps with significant energy savings. Ultra low heat signatures reduce heat on board and prevent damage to surrounding materials.
12 & 24V DC Multivolt
12 & 24V DC Multivolt. This product is designed for operation on 12V and 24V systems.
IP 67
IP 67- Completely Sealed. Each Hella marine LED lamp is a completely sealed opto-electronic device. Proven design, precision engineering, and the use of high impact acrylic and polymer materials ensures superior resistance to water, impact and UV damage.
UV Resistant
UV Resistant. Proven design, precision engineering, and the use of high quality materials ensures superior resistance to water, impact, UV and general wear and tear.
5 Year Warranty
All LED based lighting products manufactured by Hella marine carry a 5 Year Warranty covering faults in material, components or workmanship.
| Option | Part Number | ||
|---|---|---|---|
|
|
2399 LED Trailer Lamp Pack | 2VB 959 010-801 |
| Mounting | Single Bolt, optional Red Reflex Reflector Base |
| Operating Voltage | Dualvolt 12-24V DC |
| Power Consumption | Rear position 1W, Indicator 3W, Stop 3W |
| Voltage Protection | Spike, Over Voltage and Reverse Polarity |
| Cable | Pre-wired with 2.5m of cable |
| Approvals | ADR compliant |
| Document | File Name | File Size |
|---|---|---|
| Instruction Sheet | Instruction Sheet - 2559-BULK Single Mount.pdf | 373.38 KB |
| Instruction Sheet | INSTRUCTION SHEET for ROUND STOP, REAR POSITION & INDICATOR LAMP 2SD 959 010-2xx 2VB 959 010-8xx (2399) (959 150-30 06-21).pdf | 294.83 KB |
| Series | |||
|---|---|---|---|
|
|
Amber Front End Outline Lamp |
DuraLED |
Function: Front End Outline, Front Position Light Source: LED |
|
|
Red / Amber Side marker Lamp |
DuraLED |
Function: Side Marker Light Source: LED |
|
|
Round LED Submersible Rear Combination Lamp |
2399 Trailer |
Function: Rear Position / Stop / Indicator Light Source: LED |
|
|
White Front Position End Outline Lamp |
DuraLED |
Function: Front End Outline, Front Position Light Source: LED |
| Option | Part Number | ||
|---|---|---|---|
|
|
2399 LED Trailer Lamp Pack | 2VB 959 010-801 |
| Mounting | Single Bolt, optional Red Reflex Reflector Base |
| Operating Voltage | Dualvolt 12-24V DC |
| Power Consumption | Rear position 1W, Indicator 3W, Stop 3W |
| Voltage Protection | Spike, Over Voltage and Reverse Polarity |
| Cable | Pre-wired with 2.5m of cable |
| Approvals | ADR compliant |