Hella Marine

2NM NaviLED Port and Starboard Pair

Series: NaviLED Compact
View My Favourites

Compact LED navigation lamps. Attractive, power saving and ultra reliable. Designed and manufactured in New Zealand, NaviLEDlamps save power onboard and provide outstanding durability.

Ultra low current draw
NaviLED lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2 watts combined !

No bulbs, No maintenance. Ultra long service life
Hella marine LED technology has no filaments to break making NaviLED lamps extremely shock and vibration proof for reliability and safety in demanding conditions.

MultivoltTM 9-33V DC
Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.

Safe and highly visible
Hella marine optics deliver 100% correct light output and enhanced visibility compared to bulb navigation lamps.

Fully sealed for life. IP 67 Certified
Each NaviLED lamp is a completely sealed unit. High impact housings ensure durability from waves and impact.

Pre-wired with marine cable
Single core (120mm) sheathed marine cable assemblie. Ensures time saving, completely sealed installations.

2 NM Visibility

2 NM Visibility

2 NM Visibility

IMO Col Reg 72

IMO Col Reg 72

Complying with IMO ColReg 72.

USCG

USCG

Complies with USCG (United Sates Coast Guard) requirements.

RINA

RINA

Approved by the Italian RINA (Registro Italiano Navale) authority. Approved lamps carry a RINA type approval number.

ABYC A-16

ABYC A-16

Complies with ABYC (American Boat and Yacht Council) Navigation Lamp Standard A-16.

Maritime New Zealand

Maritime New Zealand

Maritime New Zealand Certified

CE

CE

Electromagnetic Compatibility (EMC) All Hella marine LED products are electronic devices. Their electrical circuits contain components that suppress possible interference, both emission as well as susceptibility to emmissions, to the limits prescribed in international standards.

Made in New Zealand

Made in New Zealand

Made and manufactured in New Zealand

LED

LED

LED - Light Emitting Diode

12 & 24V DC Multivolt

12 & 24V DC Multivolt

12 & 24V DC Multivolt. This product is designed for operation on 12V and 24V systems.

IP 67

IP 67

IP 67- Completely Sealed. Each Hella marine LED lamp is a completely sealed opto-electronic device. Proven design, precision engineering, and the use of high impact acrylic and polymer materials ensures superior resistance to water, impact and UV damage.

UV Resistant

UV Resistant

UV Resistant. Proven design, precision engineering, and the use of high quality materials ensures superior resistance to water, impact, UV and general wear and tear.

5 Year Warranty

5 Year Warranty

All LED based lighting products manufactured by Hella marine carry a 5 Year Warranty covering faults in material, components or workmanship.

Option Part Number
Black Shroud - Coloured Lens Black Shroud - Coloured Lens 2LT 980 520-801
White Shroud - Coloured Lens White Shroud - Coloured Lens 2LT 980 520-811
Black Shroud - Clear Lens Black Shroud - Clear Lens 2LT 980 520-901
White Shroud - Clear Lens White Shroud - Clear Lens 2LT 980 520-911
Material Description UV resistant, enhanced impact resistant acrylic lens High impact shroud
Minimum Visible Distance 2 Nautical Miles (Yachts and Powerboats)
Cable Pre-wired with 120mm marine cable
Operating Voltage Multivolt 9-33V DC (earlier version 8-28V DC)
Voltage Protection Spike protected to +500 volts, Reverse polarity protected to -700 volts
Power Consumption Port and Starboard less than 2W combined
Degree of Protection IP 67 - Completely Sealed
Weight 60g each (including cable)
Approvals IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ
NaviLED Compact Line Drawing
Document File Name File Size
How to separate light moduleHow to - Separate the Shroud on NaviLED Compacts.pdf 212.95 KB
Instruction Sheet2LT 980 520-xxx Instruction sheet NaviLED Compact.pdf 606.14 KB
Top of Page