Hella Marine

Blue / White EuroLED Touch Lamps

Series: EuroLED Touch
View My Favourites

Advanced LED lamps with touch sensitive switching. Power saving and ultra durable. Designed and manufactured in New Zealand, EuroLEDTouch lamps provide red / white light using the latest completely sealed touch sensitive technology.

Lighting control is beautifully simple. Touch the colour pad for blue light, the white pad for white light. On the dual colour versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required.

Dual colour EuroLEDTouch lamps can also be remotely operated from multiple points with ‘off the shelf’ ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronise the lamps to the same dimming level. Light levels are ‘remembered’ by the lamps circuitry, even when a vessel’s batteries are turned off. The lamp will always turn on at the colour intensity previously set, regardless of power interruption.

EuroLED Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on blue (less than 0.125A @ 12V) to provide significant power savings. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort.

The durability of EuroLED Touch lamps is outstanding. Each lamp is completely waterproof, impact and shock resistant, for an ultra long service life. MultivoltTM circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations.

CE

CE

Electromagnetic Compatibility (EMC) All Hella marine LED products are electronic devices. Their electrical circuits contain components that suppress possible interference, both emission as well as susceptibility to emmissions, to the limits prescribed in international standards.

Made in New Zealand

Made in New Zealand

Made and manufactured in New Zealand

LED

LED

LED - Light Emitting Diode

12 & 24V DC Multivolt

12 & 24V DC Multivolt

12 & 24V DC Multivolt. This product is designed for operation on 12V and 24V systems.

IP 67

IP 67

IP 67- Completely Sealed. Each Hella marine LED lamp is a completely sealed opto-electronic device. Proven design, precision engineering, and the use of high impact acrylic and polymer materials ensures superior resistance to water, impact and UV damage.

UV Resistant

UV Resistant

UV Resistant. Proven design, precision engineering, and the use of high quality materials ensures superior resistance to water, impact, UV and general wear and tear.

5 Year Warranty

5 Year Warranty

All LED based lighting products manufactured by Hella marine carry a 5 Year Warranty covering faults in material, components or workmanship.

Option Part Number
White Shroud White Shroud 2JA 959 951-121
Black Shroud Black Shroud 2JA 959 951-111
EuroLED Spacer Ring - black EuroLED Spacer Ring - black 8HG 959 952-002
EuroLED Spacer Ring - white EuroLED Spacer Ring - white 8HG 959 952-012
Lens Material UV resistant enhanced impact acrylic
Shroud Material Heavy duty nylon
Colour Temperature 5000K (White)
Cable Pre-wired with 2.5m of three core marine cable
Operating Voltage Multivolt 9-33V DC
Power Consumption 4.0W ( 0.33A@12V / 0.16A@24V )
Degree of Protection IP 6K6 6K7 - Completely Sealed
Weight 290g (including cable)
Installation Surface mount with robust bush mount
Approvals CE, ISO 8846 (Ignition Protection)
Document File Name File Size
Instruction SheetInstruction Sheet - EuroLED Interior Touch Switch.pdf 973.44 KB
Top of Page