Hella Marine

5 NM NaviLED PRO Masthead Navigation Lamp

Series: NaviLED Pro
View My Favourites

Ultra durable, power saving LED navigation lamps for enhanced safety.
NaviLED PRO lamps are proven worldwide on commercial, military, and recreational vessels.

Hella marine NaviLED products are the leaders in the marine navigation signal lighting industry, having established an enviable reputation for superior light control and reliability.

NaviLED PRO Port, Starboard, Masthead and Stern lamps cover vessel requirements up to 50m.

Hella marine takes navigation lighting very seriously. Often a grudge fitment to comply with the rules, these lights are extremely important when navigating at night.

All Hella marine products are designed with components that suppress possible interference, both emission as well as susceptibility to emissions, to the limits prescribed in international standards. This prevents possible interference with radio, communication, navigation, and other electrical equipment on board.

Hella marine lamps are rated at IP67 and completely sealed. UV from the sun, corrosive salt air and constant vibration: these lamps are impervious to the marine environment.

Ultra low power consumption from the highly efficient LED light source, these lamps also provide exacting light intensity across a wide range of voltage inputs from 9V DC to 32V DC.

Made in New Zealand and fully supported by Hella marine's 5 year warranty, for complete peace of mind.

NOTE: NaviLED PRO Masthead is now compliant with ABYC C-5. Visit the ABYC Compliance page to see the complete range of products with this certification.

Please contact us if you require any further information.

5 NM Visibility

5 NM Visibility

5 NM Visibility

BSH

BSH

Designed specifically for European waters these lamps approved by the German BSH-Cert at Bundesamt für Seeschifffahrt und Hydrographie (Federal Maritime and Hydrographic Agency) and carry BSH type approval numbers. BSH was formerly called DHI (Deutsches Hydrographisches Institut).

Wheel Mark

Wheel Mark

Approved under the Marine Equipment Directive (MED) 96/98/EC by BSH-Cert for use throughout Europe in all EC member states for both pleasure and commercial vessels. These lamps carry the Wheelmark approval symbol.

IMO Col Reg 72

IMO Col Reg 72

Complying with IMO ColReg 72.

USCG

USCG

Complies with USCG (United Sates Coast Guard) requirements.

ABYC A-16

ABYC A-16

Complies with ABYC (American Boat and Yacht Council) Navigation Lamp Standard A-16.

ABYC C-5 Compliant

ABYC C-5 Compliant

Complies with ABYC (American Boat and Yacht Council) Navigation Lamp Standard C-5.

Maritime New Zealand

Maritime New Zealand

Maritime New Zealand Certified

CE

CE

Electromagnetic Compatibility (EMC) All Hella marine LED products are electronic devices. Their electrical circuits contain components that suppress possible interference, both emission as well as susceptibility to emmissions, to the limits prescribed in international standards.

Made in New Zealand

Made in New Zealand

Made and manufactured in New Zealand

Red Ensign

Red Ensign

Approved for placement on UK ships. Carries the UK conformity mark for marine equipment, the ‘Red Ensign’. Required from 1st January 2023.

LED

LED

LED - Light Emitting Diode. Combining efficient LED sources with advanced optic technology, Hella marine LED products deliver more light output per watt than incandescent based lamps with significant energy savings. Ultra low heat signatures reduce heat on board and prevent damage to surrounding materials.

12 & 24V DC Multivolt

12 & 24V DC Multivolt

12 & 24V DC Multivolt. This product is designed for operation on 12V and 24V systems.

HD Grilamid Lens

HD Grilamid Lens

High-tech Grilamid lens for superior strength in extreme conditions.

IP 67

IP 67

IP 67- Completely Sealed. Each Hella marine LED lamp is a completely sealed opto-electronic device. Proven design, precision engineering, and the use of high impact acrylic and polymer materials ensures superior resistance to water, impact and UV damage.

UV Resistant

UV Resistant

UV Resistant. Proven design, precision engineering, and the use of high quality materials ensures superior resistance to water, impact, UV and general wear and tear.

5 Year Warranty

5 Year Warranty

All LED based lighting products manufactured by Hella marine carry a 5 Year Warranty covering faults in material, components or workmanship.

Option Part Number
Black Shroud - Ultra Heavy Duty Lens Black Shroud - Ultra Heavy Duty Lens 2LT 959 940-401
White Shroud - Ultra Heavy Duty Lens White Shroud - Ultra Heavy Duty Lens 2LT 959 940-411
Black NaviLED PRO Deck Mount Adaptor Black NaviLED PRO Deck Mount Adaptor 8HG 241 287-802
White NaviLED PRO Deck Mount Adaptor White NaviLED PRO Deck Mount Adaptor 8HG 241 287-812
Material Description Heavy Duty Grilamid Lens. Impact Resistant Housing
Minimum Visible Distance 5 Nautical Miles
Cable Supplied with 2.5m of twin core marine cable
Operating Voltage Multivolt™ 9-33V DC
Voltage Protection Spike protected to +500 volts. Reverse polarity protected to -700 volts
Power Consumption 4W
Degree of Protection IP 67 - Completely Sealed
Weight 150g (including cable)
Approvals Wheelmark (MED), BSH, IMO Col Reg 72, USCG, ABYC A-16, ABYC C-5, Maritime NZ, CE, UKCA, Red Ensign
Document File Name File Size
Instruction SheetIS_NaviLED PRO Masthead Wheelmark 3NM and 5NM (980 703-62 12-23).pdf 1.50 MB
EC Declaration of Conformity 2022 for NaviLED® Pro LED Navigation lampsEC Declaration of Conformity NaviLED Pro.pdf 100.38 KB
Top of Page