Hella Marine

Warm White EuroLED 75 LED Down Lights with Spring Clip

Series: EuroLED 75
View My Favourites

Stylish, reliable and energy efficient, these lamps will provide excellent illumination to enhance interior and exterior spaces.

The EuroLED 75 uses a highly efficient optical system that produces a very wide and even illumination that is specifically designed to reduce individual light source glare, which can lead to discomfort and eye strain.

This precision optic, coupled with the latest LED technology delivers exceptional colour rendering, reproducing colours in their natural richness. The EuroLED 75 replicates the pleasing appearance of a traditional round lamp but contains all the advantages of a high efficacy, durable solid state light - giving you the best of both worlds.

EuroLED 75 is available in warm or neutral white which will beautifully enhance the materials chosen for your vessel. Screw or spring mount options, pre-wired and sized for a standard cut out make new or refit installation a breeze.

Hella marine EuroLED lamps are completely sealed and manufactured using the highest grade materials that will not corrode, fade or embrittle in the harsh marine environment. Innovative, ceramic based thermally conductive materials dissipate heat generated by the LED’s, thereby extending the life of the luminaire, whilst being completely corrosion free. This means you can use the same light fittings for both the interior and exterior to create a clean and consistent lighting plan.

Like all Hella marine LED lamps the EuroLED 75 is supported by a 5 year warranty for complete peace of mind.


Comparing LED Lights in a Boat Interior
Our friend Paul Bartley from Dynamic Marine was asked by a client to look at options of improving the interior lighting in a new vessel. View this video to see the side by side before and after comparison featuring our EuroLED 75 lamps.

Video Comparing LED Lighting in Boat

CE

CE

Electromagnetic Compatibility (EMC) All Hella marine LED products are electronic devices. Their electrical circuits contain components that suppress possible interference, both emission as well as susceptibility to emmissions, to the limits prescribed in international standards.

Made in New Zealand

Made in New Zealand

Made and manufactured in New Zealand

LED

LED

LED - Light Emitting Diode. Combining efficient LED sources with advanced optic technology, Hella marine LED products deliver more light output per watt than incandescent based lamps with significant energy savings. Ultra low heat signatures reduce heat on board and prevent damage to surrounding materials.

12V DC

12V DC

12V DC Dimmable via Hella marine Dimmer 5XA 998 572-001

24V DC

24V DC

24V DC Dimmable via Hella marine dimmer 5XA 998 572-001

IP 6K 9K

IP 6K 9K

IP 6K9K - Completely Sealed. Each Hella marine LED lamp is a completely sealed opto-electronic device. Proven design, precision engineering, and the use of high impact acrylic and polymer materials ensures superior resistance to water, impact and UV damage.

UV Resistant

UV Resistant

UV Resistant. Proven design, precision engineering, and the use of high quality materials ensures superior resistance to water, impact, UV and general wear and tear.

5 Year Warranty

5 Year Warranty

All LED based lighting products manufactured by Hella marine carry a 5 Year Warranty covering faults in material, components or workmanship.

Option Part Number
12V DC, White Plastic Rim 12V DC, White Plastic Rim 2JA 958 109-511
12V DC, 316 Stainless Steel Rim 12V DC, 316 Stainless Steel Rim 2JA 958 109-521
24V DC, White Plastic Rim 24V DC, White Plastic Rim 2JA 958 109-611
24V DC, 316 Stainless Steel Rim 24V DC, 316 Stainless Steel Rim 2JA 958 109-621
Surface Mount Spacer Ring - black Surface Mount Spacer Ring - black 8HG 959 993-102
Surface Mount Spacer Ring - white Surface Mount Spacer Ring - white 8HG 959 993-112
White Plastic Spare Trim White Plastic Spare Trim 9AB 959 505-912
Stainless Steel Spare Trim Stainless Steel Spare Trim 9AB 959 505-402
Rim material UV resistant plastic or 316 stainless steel options
Colour Temperature 5000K (White) , 2700K (Warm White)
Dimming Via PWM or Voltage Resistive dimmer
Lumen 190 lumen actual output
Operating Voltage 12V or 24V DC options
Power Consumption <3W ( <0.19A @ 12V DC / <0.1A @ 24V DC)
Degree of Protection IP6K7 & IP6K9K (Completely sealed)
Installation Screw or Spring Clip options
Approvals CE, RCM
Cable Pre-wired with 120mm tinned marine cable
Manufactured In New Zealand
EuroLED 75 Spring Clip Outline Drawing
Document File Name File Size
Instruction SheetEuroLED 75 LED Interior-Exterior Downlight Instruction Sheet_958 315-46 (07_21).pdf 901.76 KB
Top of Page